Road Information Guide Signs Blue and White Color Sign Thick Aluminum Traffic Sign Board Cost
product description:
a) The detour sign is used to indicate the route to be detoured by the vehicles at the intersection. It is located at an appropriate position before the traffic control intersection. The signs are blue with white blocks. The detour is black. Corresponding prohibition sign graphics can be drawn on the detour signs as needed, and guidance signs should be set up to indicate the correct driving path under traffic control.
b) The road inaccessibility sign is used to indicate that the road ahead has no exit and cannot pass. The sign is blue with white blocks and red graphics. This sign can be used in conjunction with other guidance signs.
c) The sign of fewer lanes is used to indicate that the number of lanes ahead is decreasing, and vigilance is required. Set an appropriate position before the change point. When used for general roads, it has blue background, white graphics, white border, and blue lining; when it is used for expressways or urban expressways, it has green background, white graphics, white border, and green lining.
d) The number of lanes increase sign is used to remind the driver of the vehicle that the number of lanes has increased. It is necessary to drive cautiously and set it at an appropriate position before the number of lanes increases. This sign is used for general roads with blue background, white graphics, white border, blue lining; when used for expressways or urban expressways, it has green background, white graphics, white
border, green lining.
f) Traffic monitoring equipment signs are set at appropriate locations on road sections where traffic monitoring equipment such as image acquisition is installed. This sign is used for general roads with blue background, white graphics, white border, blue lining; when used for expressways or urban expressways, it has green background, white graphics, white border, green lining.
j) The tunnel exit distance notice sign is used to indicate the distance to the tunnel exit ahead. It is set in an extra-long tunnel with a length of more than 3000m, and one block is installed every 500m from the distance of 2000m from the tunnel exit to the tunnel exit. This sign is generally set on the side wall of the tunnel.It is used for general roads with blue background, white graphics, white border, and blue lining; when used for expressways or urban expressways, it has green background, white graphics, white border, green Lining. The turning direction of the tunnel curve in the layout should correspond to the actual situation.
h) The linear guidance mark is used to guide the driving direction, to prompt the road user to change the linear shape ahead, and pay attention to driving carefully.
j) Milestones and milestone milestones are used to indicate the mileage of highways. They are located on the right side of the increasing direction of highway piles, and are set every 1 km. When the national highway mileage number exceeds four digits, a larger size is used.
The business purpose of Chongqing Jiuzhou Transportation Facilities Co., Ltd. is: " survival with Quality, development with reputation ". We believe that working together and making progress together can open up a win-win market for traffic safety facilities. We will actively and sincerely cooperate with customers to create a better quality signage product. Welcome clients to visit, guide and negotiate business. Reciprocity and win-win situation to make better future!
If you need more information, please contact Whatsapp/WeChat/Tel: 08617830584616
